FIBER CEMENT SHEATHING PRODUCTS
Information
FIBER CEMENT SHEATHING
Your Solution partner from foundation to roof
Cement and wood have been used as two basic materials of construction since the beginning of construction. The first company to manufacture the present cement-bonded particle boards was established in 1967 in Switzerland. Research continued since then aiming to create boards manufactured from versatile, practical, environment-friendly and wholly ecological raw materials.
Standard Fiber Cement Sheathing has been manufactured in commercial scales since 1984 and it has become the favorite product of the building construction sector worldwide.
Our Fiber Cement Boards are a mixture of cement, wood, and chemical additives that are environmentally friendly and non-toxic. The technology is widely used and recognized for its superior structural qualities obtained from bringing together the tensile strength, lightness, elasticity, processibility features, and compressive strength resistance against water, moisture, fire, and decay of cement.
Properties of Fiber Cement Sheathing
Fiber Cement particle boards are the right material required for wet areas and exterior facades for its resistance to moisture and water
It does not mould due to its moisture resistance, pest resistance and does not host insects and pests due to its cement content.
Fire Resistance Standard: TS EN 13501-1
Burn: B1
Smoke: S1
Fall of particles or burning drips: D0
A Fiber cement board layer of 1 cm in thickness provides the same thermal insulation as a 10 cm thick concrete. Thermal insulation provided by a 8.4 cm thick sandwich wall covered with fiber cement sheathing on both surfaces can be equal to that provided by 39 cm thick insulated air brick.
The material has the highest resistance to impact and crash among similar materials.
The material allows inserting lamps, opening grooves and bushings, it can be drilled and cut easily.
It is a light material For example; 10 mm thick Fiber cement board weighs 13 kg/ m2
TS EN 13986 ARTICLE 5.10
Sound Transmission loss (R) in 1 kHz- 3 kHz range
29 dB for 10mm
32 dB 18 mm
TS EN 13986 ARTICLE 5.11
Between 250 Hz- 500 Hz: 0.10
Between 1000 Hz- 2000 Hz: 0.30
Thanks to its high alkalinity (pH 11-13) and density, our fiber cement is resistant to environmental factors and biological agent. Its susceptibility to fungus and mold was tested in above-the-ground and buried conditions in extremely moist areas. No mold or fungus was detected on boards above the ground; some molding traces were detected on boards after remaining buried under the ground for 8 years. However, this deterioration remains at 0.9 mm thickness on the surface. The insect infestation test conducted in open air revealed that the boards were not affected by insects.
Lightness of Fiber Cement boards transfers less load to the supported of the building enhancing the seismic resistance of the building.
Fiber Cement boards have fire-stop characteristics.
STANDARD
STANDARD FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
Manufactured since 1984 and the favorite member of the fiber cement family, our STANDARD fiber cement board is manufactured from a mixture of wood, cement and chemical additives not harmful to the health. It derives its lightness, elasticity and processibility from wood; its resistance to water, moisture, fire and decay from cement, and serves the users’ with superior structural qualities
STANDARD FIBER CEMENT SHEATHING BOARD
Production Standards:
Finishing: Unfinished/ Cement-bonded mineral layer
Thickness: 8/10/12/14/16/18/20/24/30 mm
Width: 1250 mm
Length: 2500/ 2800/ 3000 mm
Weight: 10 / 13/ 16/ 18/ 20/ 30/ 38 kg/m2
It may be manufactured in different thicknesses, and its length and width may be tailor-made.
Advantages of using our STANDARD Fiber Cement Boards:
- It does not contain any harmful material
- It is an environmentally friendly construction material
- It provides excellent thermal and acoustic insulation
- It is ideal for prefabricated buildings
- It does not swell or mould in water
- It is not affected by moisture
- It is crash and impact resistant
- It is resistant to earthquakes.
- It is insect proof
- It is resistant to movement related to humidity and temperature.
- It is fiber resistant and meets as well as exceeds European Fire Standards.
- It is a lightweight building material; east and fast to install
STANDARD PLUS+
STANDARD PLUS+ FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
STANDARD PLUS+ is the names given to non-textured boards with both surfaces coated with layers containing no wood particles and are composed of only inorganic materials. The core is a mixture of wood, cement and chemicals additives that are non-toxic.
It is a modern and widely used structural material resistant to earthquake and fire with its superior structural qualities obtained by bringing together the tensile strength, elasticity and lightness, processibility features of wood and compressive strength resistance against water, moisture, fire, decay of cement. Its resistance to weathering and its paint-adhesion features have been improved with the concrete layer on the surface.
STANDARD PLUS+ can be used on the interior and exterior of all structure types
STANDARD PLUS FIBER CEMENT SHEATHING BOARD
Production Standards:
Finishing: Unfinished/ Cement-bonded mineral layer
Thickness: 08/10/ 12/ 14/ 16/ 20/ 24/ 30 mm
Width: 1250 mm
Length: 2500/ 2800/ 3000 mm
It may be manufactured in different thicknesses, and its length and width may be tailor-made.
STANDARD PLUS+ General Characteristics
- It provides perfect sound and heat insulation
- It does not swell in water
- It is not affected by mildew
- It is not affected by pests
- It is fire-resistant
- It can be rapidly and easily mounted
- It has high impact resistance
- It is not affected by heat variations
- It is not affected by environmental conditions
- It is environmentally-friendly
- It does not release formaldehyde
- It does not contain asbestos
STANDARD PLUS+ Areas of application:
- Interior and exterior of all types of structures
- Independent and raw houses
- Multi storey building facades
- Spaces requiring insulation
- Facades of commercial; business and shopping centers
- Store facades
- Pre-fabricated structures
- Applications with special dimensions
- Site offices
- Warehouses and big halls
- Earthquake houses and shelters
- Spaces requiring insulation and temperature control
- Exterior façade cladding of steel structures
- All types of roofs
- Interior partitions
- Schools
WOODPAN
WOODPAN FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
WOODPAN, our Wood Textured Fiber Cement sheathing, which is a variation of STANDARD PLUS Fiber Cement has a non-textured surface and an exterior façade product. YALIPAN is inspired from the warm look that wood gives to façades. YALIPAN add the Wooden Texture to the superior qualities of the Plus group products, which has led to the creation of a building material that is insect-proof and does not decay or require constant maintenance unlike wood. YALIPAN has a European Fire Rating A2, d1, s0.
WOODPAN FIBER CEMENT SHEATHING
Production Standards:
Finishing:
Outer layer: Wood-textured cement bonded mineral layer
Inner Layer: Smooth cement-bonded mineral layer
Thickness: 10/12 mm
Width: 1250mm
Length: 3000 mm
It is possible to manufacture boards in other thicknesses and to cut them into custom width and length
<table>
Areas of application:
- On building facades
- In soffit and fascia cladding
- For decorative purposes in interior spaces
- On prefabricated building facades
- On light and heavy steel construction
WOODPAN General Characteristics
- It provides perfect sound and heat insulation
- It does not swell in water
- It is not affected by mildew
- It IS stable
- It is fire-resistant
- It can be rapidly and easily mounted
- It has high impact resistance
- It is not affected by heat variations
- It is not affected by environmental conditions
- It is environmentally-friendly
- It does not release formaldehyde
- It does not contain asbestos
- It has a real wood texture
- It can be painted with high paint adhesion qualities
- It Resistant on both surfaces against weathering and scratches
- It is high impact and wind resistant
STONEPAN
STONEPAN FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
STONEPAN is the name given to our stone-textured boards. Both surfaces of which are coated by layers containing no wood particles, and are composed of only inorganic materials the core is a mixture of wood, cement and chemical additives that non-toxic. It is a modern and widely used structural material with its superior structural qualities obtained by bringing together tensile strength, resistance against water, moisture, fire, decay of concrete and cement. Its resistance to weathering and its paint adhesion have been increased thanks to the more durable and more stable layer on its surface. It is used on exterior façade cladding of all types of structures and for decorative purposes in interior spaces.
STONEPAN FIBER CEMENT SHEATHING
Production Standards
Finishing:
Outer Layer: Stone-textured cement-bonded mineral layer
Inner Layer: Smooth cement-bonded mineral layer
Thickness: 12 mm
Width: 1250 mm
Length: 3000 mm
It is possible to manufacture boards in other thicknesses and to cut them into custom width and length
STONEPAN General Characteristics
- It provides perfect sound and heat insulation
- It does not swell in water
- It is not affected by mildew
- It IS stable
- It is fire-resistant
- It can be rapidly and easily mounted
- It has high impact resistance
- It is not affected by heat variations
- It is not affected by environmental conditions
- It is environmentally-friendly
- It does not release formaldehyde
- It does not contain asbestos
- It has a real stone texture
- It can be painted with high paint adhesion qualities
- Resistant on both surfaces against weathering and scratches
- It is high impact and wind resistant
Areas of application:
- On building facades
- In soffit and fascia cladding
- For decorative purposes in interior spaces
- On prefabricated building facades
- On light and heavy steel construction
FRAPAN
FRAPAN FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
It is a facade siding board that is relief wood-textured, which is manufactured for use in facades of buildings for clapboarding applications. both surfaces of FRAPAN are protected with natural materials. Along with the smooth-surfaced facade products and STANDARD PLUS, FRAPAN was inspired from the warm look that the wood gives to buildings. It has all the superior qualities of Plus group and a wooden texture. Hence, there is now a construction product that does not rot like wood, which is insect-proof and does not require constant care.
FRAPAN FIBER CEMENT SHEATHING BOARD
Production Standards:
Thickness: 12 mm
Length: 1250 mm
Width: 3000 mm
Custom: It is possible to manufacture boards in other thicknesses and to cut them in the required width and length
STANDRD CUT DIMENSIONS
12x 175x 3000 mm
12X 203X 3000 mm
12X 310X 3000 mm
12X 410X 3000 mm
12X 623X 3000 mm
Advantages of FRAPAN Fiber Cement Boards:
- Solid, durable wood-textured facade board.
- It does not contain any harmful materials.
- It provides excellent thermal and acoustic insulation.
- It is ideal for prefabricated buildings.
- It does not swell or rot in water.
- It is not affected by humidity.
- It is not plastic.
- It is insect proof.
- It is non-flammable.
- It is fast and easy to install.
- It can be painted.
- It is protected with natural materials on both surfaces.
FUGAPAN
FOGAPAN FIBER CEMENT SHEATHING
_________________________________________________________________________________________________________________________
It is a facade siding board that is relief wood-textured, which is manufactured for use in facades of buildings for clapboarding applications. both surfaces of FUGAPAN are protected with natural materials. Along with the smooth-surfaced facade products and STANDARD PLUS, FUGAPAN was inspired from the warm look that the wood gives to buildings. It has all the superior qualities of Plus group and a wooden texture. Hence, there is now a construction product that does not rot like wood, which is insect-proof and does not require constant care.
FUGAPAN FIBER CEMENT SHEATHING
Production Standards
Thickness: 12 mm
Length: 1250 mm
Width: 3000 mm
Custom: It is possible to manufacture boards in other thicknesses and to cut them into custom width and length
STANDRD CUT DIMENSIONS
12x 175x 3000 mm
12X 203X 3000 mm
12X 310X 3000 mm
12X 410X 3000 mm
12X 623X 3000 mm
Advantages of FUGAPAN Fiber Cement Boards:
- Solid, durable wood-textured facade board.
- It does not contain any harmful materials.
- It provides excellent thermal and acoustic insulation.
- It is ideal for prefabricated buildings.
- It does not swell or rot in water.
- It is not affected by humidity.
- It is not plastic.
- It is insect proof.
- It is non-flammable.
- It is fast and easy to install.
- It can be painted.
- It is protected with natural materials on both surfaces.
MONOPAN
MONOPAN FIBER CEMENT SHEATHING _________________________________________________________________________________________________________________________
It is a facade siding board that is relief wood-textured, which is manufactured for use in facades of buildings for clapboarding applications. both surfaces of MONOPAN are protected with natural materials. Along with the smooth-surfaced facade products and STANDARD PLUS, MONOPAN was inspired from the warm look that the wood gives to buildings. It has all the superior qualities of Plus group and a wooden texture. Hence, there is now a construction product that does not rot like wood, which is insect-proof and does not require constant care.
MONOPAN FIBER CEMENT SHEATHING BOARD
Production Standards:
Thickness: 12 mm
Length: 1250 mm
Width: 3000 mm
Custom: It is possible to manufacture boards in other thicknesses and to cut them in the required width and length
STANDRD CUT DIMENSIONS
12x 175x 3000 mm
12X 203X 3000 mm
12X 310X 3000 mm
12X 410X 3000 mm
12X 623X 3000 mm
Advantages of MONOPAN Fiber Cement Boards:
- Solid, durable wood-textured facade board.
- It does not contain any harmful materials.
- It provides excellent thermal and acoustic insulation.
- It is ideal for prefabricated buildings.
- It does not swell or rot in water.
- It is not affected by humidity.
- It is not plastic.
- It is insect proof.
- It is non-flammable.
- It is fast and easy to install.
- It can be painted.
- It is protected with natural materials on both surfaces.
